Back to Blog
VPN 1 min readLast updated

WireGuard Admin VPN — Split Tunnel to Reach the MGMT VLAN

Configuring a minimal WireGuard VPN that gives remote access to the MGMT VLAN without routing all traffic through the tunnel.

Update, October 2026: the Admin VPN described here is now the only remote-access path into the network (Tailscale was removed). The Users VPN mentioned below is not part of the current setup.

Two WireGuard endpoints live on the UCG Fiber. Admin VPN gives access to MGMT and Admin VLANs. Users VPN gives users road-warrior access with internet routed through the tunnel for security on untrusted networks.

Split tunnel on the Admin VPN means only RFC1918 prefixes route through the tunnel. Internet traffic goes direct. This keeps latency low for day-to-day work while still giving full management plane access when remote.

The firewall allows the Admin VPN zone to reach MGMT and Admin — and nothing else. Even on the Admin VPN you can't reach Skynet or Guest from the tunnel.