A honeypot is a trap — a resource that has no legitimate purpose, and any attempt to access it indicates anomalous behavior. You can deploy honeypots on your network for free by assigning unused IP addresses as sentries.
The Honeypot Technique#
Assign the .2 address on each VLAN as a honeypot. No services run on these IPs. No devices are assigned these addresses. No legitimate traffic should ever target them.
Honeypot IPs by VLAN:
Reserve the .2 address on each VLAN (MGMT, Admin, IPTV, Users, Skynet, and Guest).
Any traffic destined for one of these addresses is, by definition, anomalous.
Detection Mechanism#
Configure the UniFi firewall to log all traffic destined for honeypot IPs. The logs will surface in the UniFi traffic log. A device that has been compromised and is performing lateral movement scans will probe sequential IPs looking for responsive machines. The honeypot will be hit. A misconfigured device that is pointing at the wrong subnet will query the honeypot's IP instead of its intended target and be logged.
Device Supervision for Real-Time Alerts#
The U7 Pro Outdoor AP, the DNS_Server (Pi), and the G6 Entry camera all have device supervision enabled on their switch ports. Supervision is a heartbeat mechanism — the device sends a health packet every minute, and if no heartbeat is received for 15 minutes, the gateway alerts.
If a supervised device is powered off, the cable is disconnected, or something worse happens, the gateway logs a supervision failure immediately. This is a fast-path alert for critical infrastructure.
Cost and Effort#
Zero. No additional hardware. No software. No cloud service. No active scanning or monitoring tools. Just firewall logging on a specific IP address and the discipline of checking the logs occasionally. The value is disproportionate to the effort.
Limitations#
Honeypots detect scanning and probing — lateral movement reconnaissance. They do not detect exfiltration over encrypted channels. A compromised device that silently copies all your files to a cloud provider will not hit the honeypot. Honeypots are one layer, not a complete intrusion detection strategy.
Combined with firewall segmentation (so the compromised device can't reach sensitive networks in the first place), honeypots provide a layered detection surface that surfaces strange behavior early.